DTS20-1 Single-Axis Tool Setter

Product Description:

DTS20 is a contact type 1D tool setting instrument, which can perform on-machine tool length measurement, broken tool detection and automatic compensation for 1mm~20mm tools. The product uses cables to perform signal transmission. DTS20 is composed of high-precision switches, high-hardness, high-wear hard contact and signal transmission interface. The contact head is used to make contact with the tool and transfer the force to the high-precision switch through the flexible support rod installed under it; the on and off signals from the switch are transmitted to the CNC system through the interface to identify the length of the tool , Calculation, compensation, access, etc. DTS20 can automatically identify tool wear and tool breakage, helping companies improve production efficiency and improve product processing accuracy.DTS20 is an on-machine measuring device, mainly used for machining center type machine tools.


Product Detail

Product Tags

Product Features

1. Mechanical trigger design, stable signal
2. Repeat positioning accuracy <2um (2σ)
3. The maximum tool diameter <20mm
4. Trigger life: 3 million times
5. Indicator light design, the status is intuitive and visible

Product Parameter

Model QIDU DTS20-1
Contact diameter φ20
Contact trigger direction +Z
Pre-travel No
Output A: NO (normally open)
stroke 8mm
Trigger protection stroke 4mm
Repeat positioning accuracy (2σ) <2um (probe: 50mm, speed: 50~200mm/min)
Trigger life 3 million times
Signal transmission method Cable 5m oil resistance 6 core φ4.8
Protection structure IP67
Contact force 1.5N (installation state: vertical)
Contact material Cemented carbide
Surface processing Grind 4S
Contact rating DC24V 20mA (MAX) recommended value 10mA) resistance load
Protective tube 1.5m minimum bending radius R7
LED lights Always off, lights up during operation

  • Previous:
  • Next:

  • Related Products