Products

  • DOP40 Infrared compact CNC touch probe system

    DOP40 Infrared compact CNC touch probe system

    DOP40 is a compact optical transmission touch-probe system produced by Qidu metrology. The probe applys multi-threshold power control technology and reduce the power consumption significantly, so that the active life is over 1year with normal 3.6V/1200mA battery. Utilizing a dual-channel and intelligent switching technology, the system offers the highest level of resistance to light interference for dense machine conditions. DOP40 system is widely used for workpiece set-up inspection and measurement after machining on small and medium vertical and horizontal machining centre and lathe in the vairous industry, especially in the consumable electronics industry.

  • DRP40-M Radio lathe compact probe system

    DRP40-M Radio lathe compact probe system

    DRP40-M is a compact 3D touch probe system of workpice inspection specially designed for automatic turret lathe and turning-milling composite. The probe shape is designed according to the size of the tool holder, which is convenient for the clamping and receiving of the probe. Radio signal transmission is used between the probe and the receiver. DRP40-M uses the stylus to detect the workpiece coordinate system, and then sends a signal through the trigger mechanism inside the probe. The receiver transmits the signal to the machine tool system after receiving the signal. The machine tool system calculates and automatically compensates for the coordinate deviation after receiving the signal. Let the machine tool perform processing according to the real coordinates of the workpiece. DRP40-M can help companies improve production efficiency and improve product processing accuracy.DRP40-M is an on-machine measuring device, mainly used in turret lathes and turning-milling compound machine tools.

  • Straight stylus, M2 thread, ∅4 ruby ball, tungsten carbide stem, 20 length, EWL 20mm

    Straight stylus, M2 thread, ∅4 ruby ball, tungsten carbide stem, 20 length, EWL 20mm

    Length(mm) 20
    Stem Material Tungsten carbide
    Contact Feature Ruby ball
    Ball/Tip Size(mm) 4
    Ball/Tip Material Ruby
    EWL(mm)
    Screw M2
  • Straight stylus, M4 thread, ∅1 flat, tungsten carbide stem, 25 length, EWL 15mm

    Straight stylus, M4 thread, ∅1 flat, tungsten carbide stem, 25 length, EWL 15mm

    Length(mm) 25
    Stem Material Tungsten carbide
    Contact Feature Flat
    Ball/Tip Size(mm) 1
    Ball/Tip Material Tungsten carbide
    EWL(mm) 15
    Screw M4
  • Straight stylus, M2 thread, ∅2 ruby ball, tungsten carbide stem, 20 length, EWL 7mm

    Straight stylus, M2 thread, ∅2 ruby ball, tungsten carbide stem, 20 length, EWL 7mm

    Length(mm) 20
    Stem Material Tungsten carbide
    Contact Feature Ruby ball
    Ball/Tip Size(mm) 2
    Ball/Tip Material Ruby
    EWL(mm) 12
    Screw M2
  • DLP25 Wired modular probe system

    DLP25 Wired modular probe system

    DLP25 is a compact 3D CNC touch probe system for workpice inspection. It adopts a modular combination design. The length of the probe part of the product can be lengthened arbitrarily, and a cable is used to transmit signals between the probe and the receiver. DLP25 uses the stylus to detect the workpiece coordinate system, and then sends a signal through the trigger mechanism inside the probe, which is transmitted to the machine tool system through a cable. The machine tool system calculates and automatically compensates for the coordinate deviation after receiving the signal, so that the machine tool can follow the real coordinates of the workpiece for processing. DLP25 can help companies improve production efficiency and improve product processing accuracy.DLP25 is an on-machine measuring device, mainly used in machine tools such as high-gloss machines and grinders (brackets are required).

  • DTS200 Single- Axix Tool Setter

    DTS200 Single- Axix Tool Setter

    DTS200 is a photoelectric one-dimensional tool setting instrument, which can perform on-machine tool length measurement, broken tool detection and automatic compensation for tools from 0.1mm to 20mm. The product uses cables to perform signal transmission. DTS200 is composed of a photoelectric trigger switch, a hard contact with high hardness and high wear resistance and a signal transmission interface. The contact head is used to make contact with the tool and transfer the force to the high-precision switch through the flexible support rod installed under it; the on and off signals from the switch are transmitted to the CNC system through the interface to identify the length of the tool , Calculation, compensation, access, etc. DTS200 can automatically identify tool wear and tool breakage, helping companies improve production efficiency and improve product processing accuracy. DTS200 is an on-machine measuring device with a large stroke design. It is mainly used for machining center type machine tools.

  • DMTS-R Compact 3D Radio Tool Setter

    DMTS-R Compact 3D Radio Tool Setter

    DMTS-R is a contact type 3D tool setting instrument, which can detect and automatically compensate various broken tools, tool diameters and tool wear. The product adopts radio signal transmission. DMTS-R is composed of a high-precision switch, a hard round contact head with high hardness and high wear resistance and a signal trigger mechanism. The contact head is used to make contact with the tool, and transmits the force to the high-precision switch through the flexible support rod installed under it; the on and off signals from the switch are transmitted through the trigger mechanism, and the receiver transmits the signal after receiving the signal In the numerical control system, the tool length and diameter are recognized, calculated, compensated, and accessed. DMTS-R can automatically identify tool wear and tool breakage, helping companies improve production efficiency and improve product processing accuracy. DMTS-R is an on-machine measuring device, which is mainly used in machine tools with restricted cable usage, such as double-table machining centers.

  • Straight stylus, M4 thread, ∅1 ruby ball, tungsten carbide stem, 35 length

    Straight stylus, M4 thread, ∅1 ruby ball, tungsten carbide stem, 35 length

    Length(mm) 35
    Stem Material Tungsten carbide
    Contact Feature Flat
    Ball/Tip Size(mm) 1
    Ball/Tip Material Tungsten carbide
    EWL(mm) N/A
    Screw M4
  • Straight stylus, M3 thread, ∅0.5 ruby ball, tungsten carbide stem, 20 length, EWL 3mm

    Straight stylus, M3 thread, ∅0.5 ruby ball, tungsten carbide stem, 20 length, EWL 3mm

    Length(mm) 20
    Stem Material Tungsten carbide
    Contact Feature Ruby ball
    Ball/Tip Size(mm) 0.5
    Ball/Tip Material Ruby
    EWL(mm) 3
    Screw M3
  • Straight stylus, M2 thread, ∅0.5 tungsten carbide stem, 15 length, EWL 7mm

    Straight stylus, M2 thread, ∅0.5 tungsten carbide stem, 15 length, EWL 7mm

    Length(mm) 15
    Stem Material Tungsten carbide
    Contact Feature Flat
    Ball/Tip Size(mm) 0.5
    Ball/Tip Material Tungsten carbide
    EWL(mm) 7
    Screw M2
  • Straight stylus, M4 thread, ∅4 ruby ball, tungsten carbide stem, 50 length, EWL 38mm

    Straight stylus, M4 thread, ∅4 ruby ball, tungsten carbide stem, 50 length, EWL 38mm

    Length(mm) 50
    Stem Material Tungsten carbide
    Contact Feature Ruby ball
    Ball/Tip Size(mm) 4
    Ball/Tip Material Ruby
    EWL(mm) 38
    Screw M4
1234 Next > >> Page 1 / 4