Tool Setters

  • DTS200 Single- Axix Tool Setter

    DTS200 Single- Axix Tool Setter

    DTS200 is a photoelectric one-dimensional tool setting instrument, which can perform on-machine tool length measurement, broken tool detection and automatic compensation for tools from 0.1mm to 20mm. The product uses cables to perform signal transmission. DTS200 is composed of a photoelectric trigger switch, a hard contact with high hardness and high wear resistance and a signal transmission interface. The contact head is used to make contact with the tool and transfer the force to the high-precision switch through the flexible support rod installed under it; the on and off signals from the switch are transmitted to the CNC system through the interface to identify the length of the tool , Calculation, compensation, access, etc. DTS200 can automatically identify tool wear and tool breakage, helping companies improve production efficiency and improve product processing accuracy. DTS200 is an on-machine measuring device with a large stroke design. It is mainly used for machining center type machine tools.

  • DMTS-R Compact 3D Radio Tool Setter

    DMTS-R Compact 3D Radio Tool Setter

    DMTS-R is a contact type 3D tool setting instrument, which can detect and automatically compensate various broken tools, tool diameters and tool wear. The product adopts radio signal transmission. DMTS-R is composed of a high-precision switch, a hard round contact head with high hardness and high wear resistance and a signal trigger mechanism. The contact head is used to make contact with the tool, and transmits the force to the high-precision switch through the flexible support rod installed under it; the on and off signals from the switch are transmitted through the trigger mechanism, and the receiver transmits the signal after receiving the signal In the numerical control system, the tool length and diameter are recognized, calculated, compensated, and accessed. DMTS-R can automatically identify tool wear and tool breakage, helping companies improve production efficiency and improve product processing accuracy. DMTS-R is an on-machine measuring device, which is mainly used in machine tools with restricted cable usage, such as double-table machining centers.

  • DNC56/86/168 Laser tool setter series

    DNC56/86/168 Laser tool setter series

    DNC168, It is suitable for large CNC machining centers such as gantry CNC milling machine. It can realize high-precision and high-speed non-contact tool setting and tool damage detection for face tools and various special-shaped tools with large diameter.

    DNC86, It is suitable for CNC machining center, CNC lathe, horizontal machining center and other medium-sized CNC machine tools. It can realize high-precision and high-speed non-contact tool setting, tool damage detection and contour detection for all kinds of integral tools, forming tools and small and medium diameter disc tools.

    DNC56, t is suitable for small CNC machining machines such as precision carving machine, high gloss machine, glass machine and so on. Non contact tool setting, tool damage detection and contour detection with high precision and high speed are realized for various fine diameter tools (scenes where contact trigger force may cause tool damage), glass processing grinding heads, etc.

  • DMTS-L Compact 3D Cable Tool Setter

    DMTS-L Compact 3D Cable Tool Setter

    DMTS-L is a compact 3D touch-trigger tool setter with hard-wired signal transmission used for rapid measurement of tool length and diameter and broken tool detection on all sizes of vertical and horizontal machining centres and all gantry machining centres.

  • DTS20-1 Single-Axis Tool Setter

    DTS20-1 Single-Axis Tool Setter

    DTS20 is a contact type 1D tool setting instrument, which can perform on-machine tool length measurement, broken tool detection and automatic compensation for 1mm~20mm tools. The product uses cables to perform signal transmission. DTS20 is composed of high-precision switches, high-hardness, high-wear hard contact and signal transmission interface. The contact head is used to make contact with the tool and transfer the force to the high-precision switch through the flexible support rod installed under it; the on and off signals from the switch are transmitted to the CNC system through the interface to identify the length of the tool , Calculation, compensation, access, etc. DTS20 can automatically identify tool wear and tool breakage, helping companies improve production efficiency and improve product processing accuracy.DTS20 is an on-machine measuring device, mainly used for machining center type machine tools.

  • DTS30 Single-Axis Tool Setter

    DTS30 Single-Axis Tool Setter

    DTS30 is a contact type 1D tool setting instrument, which can perform on-machine tool length measurement, broken tool detection and automatic compensation for 1mm~20mm tools. The product uses cables to perform signal transmission. DTS30 is composed of high-precision switches, high-hardness, high-wear hard contact and signal transmission interface. The contact head is used to make contact with the tool and transfer the force to the high-precision switch through the flexible support rod installed under it; the on and off signals from the switch are transmitted to the CNC system through the interface to identify the length of the tool , Calculation, compensation, access, etc. DTS30 can automatically identify tool wear and tool breakage, helping companies improve production efficiency and improve product processing accuracy.DTS30 is an on-machine measuring device, mainly used for machining center type machine tools

  • DTS100 Single-Axis Tool Setter

    DTS100 Single-Axis Tool Setter

    DTS100 is a photoelectric one-dimensional tool setting instrument, which can perform on-machine tool length measurement, broken tool detection and automatic compensation for 0.1~10mm tools. The product uses cables to perform signal transmission. DTS100 is composed of a photoelectric trigger switch, a hard contact with high hardness and high wear resistance and a signal transmission interface. The contact head is used to make contact with the tool and transfer the force to the high-precision switch through the flexible support rod installed under it; the on and off signals from the switch are transmitted to the CNC system through the interface to identify the length of the tool , Calculation, compensation, access, etc. DTS100 can automatically identify tool wear and tool breakage, helping companies improve production efficiency and improve product processing accuracy.DTS100 is an on-machine measuring device, mainly used for small-stroke machine tools such as precision engraving machines and high gloss machines.